Asus B250M-C PRO Manuale - Pagina 10

Sfoglia online o scarica il pdf Manuale per Scheda madre Asus B250M-C PRO. Asus B250M-C PRO 26.

CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN1/2)

Connect the fan cables to the fan connectors on the motherboard, ensuring that the

black wire of each cable matches the ground pin of the connector.

Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside

the system may damage the motherboard components. These are not jumpers! Do not

place jumper caps on the fan connectors! The CPU_FAN connector supports a CPU fan

of maximum 1A (12 W) fan power.

ATX power connectors (24-pin EATXPWR, 8-pin ATX12V)

Correctly orient the ATX power supply plugs into these connectors and push down

firmly until the connectors completely fit.

•

M.2 socket 3

These sockets allow you to install an M.2 (NGFF) SSD module.

These sockets support M Key and 2242/2260/2280 storage

devices.

Intel

Install Intel

designed for 7th / 6th Generation Intel

processors.

For more details, refer to Central Processing Unit (CPU).

DDR4 DIMM slots

This motherboard comes with four Double Data Rate 4 (DDR4) Dual Inline Memory

Module (DIMM) sockets. A DDR4 module is notched differently from a DDR, DDR2,

or DDR3 module.

For more details, refer to System memory.

DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot.

1-2

For a fully configured system, we recommend that you use a power supply unit

(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides

a minimum power of 350 W.

If you are uncertain about the minimum power supply requirement for your system,

refer to the Recommended Power Supply Wattage Calculator at http://support.

asus.com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for

details.

LGA1151 CPU socket

LGA1151 CPU into this surface mount LGA1151 socket, which is

Core™ i7 / i5 / i3, Pentium

Chapter 1: Product introduction

M.2(SOCKET3)

, and Celeron