Canon S 530D Manuale di servizio - Pagina 36
Sfoglia online o scarica il pdf Manuale di servizio per Software Canon S 530D. Canon S 530D 45. Canon bjc-s530d: setup instruction
Anche per Canon S 530D: Opuscolo e specifiche (2 pagine), Inizia qui (2 pagine)
Stampa la pagina
6.16.2. Error display
When a printer error occurs, the following errors are displayed in both the S530's operation panel and the
digital camera's screen. However, some errors are only displayed in either the S530D or the digital
camera. (Refer to Table 2 below.)
The error codes are displayed on the operation panel of the S530D, while the error messages are displayed
on the screen of the digital camera.
In the digital camera's screen, the "Continue" or "Cancel" button is displayed depending on the error.
(Refer to Table 1 below.)
Error Name
Code Priority
Printer is being used
1
Printer is not ready
2
Ink low
101
Incorrect position of
102
paper selection lever
Ink low and incorrect
103
position of paper
selection lever
Ink out
201
Waste ink
202
Paper out
301
Paper jam
302
Cover open
401
No head installed
402
Non-supported
601
paper selection
Transmission time
611
out
Non-supported
612
device
Printer service call
802
Other printer errors
803
Others
809
*DSC: Digital camera
6.16.1. Printing from Computer during Digital Camera Direct Printing
In Digital Camera Direct Printing, as one page is equal to one job, printing from the computer may occur in
the interval between direct print jobs.
Table 1: Printer error (O: Applicable, -: Not applicable)
9
1. Wait until printing starts.
2. Press "Cancel" on DSC to cancel printing.
9
1. Wait until printing starts.
2. Press "Cancel" on DSC to cancel printing.
8
1. Replace ink tanks, printing will start.
2. Press "Continue" on DSC to force printing.
3. Press "Cancel" on DSC to cancel printing.
8
1. Rectify lever location, and perform printing.
2. Press "Continue" on DSC to force printing.
3. Press "Cancel" on DSC to cancel printing.
8
1. Rectify lever position. Ink low warning may appear.
2. Replace ink tanks. Incorrect lever position error may appear.
3. Press "Continue" on DSC to force printing.
4. Press "Cancel" on DSC to cancel printing.
7
1. Replace ink tanks, printing will start.
2. Press "Resume" on printer to force printing.
3. Press "Cancel" on DSC to cancel printing.
6
1. Press "Resume" on printer to force printing
2. Press "Cancel" on DSC to cancel printing.
5
1. Load paper, and press "Resume" on printer to start printing.
2. Press "Cancel" on DSC to cancel printing.
5
1. Load paper, and press "Resume" on printer to start printing.
2. Press "Cancel" on DSC to cancel printing.
4
1. Close cover, printing will start.
2. Press "Cancel" on DSC to cancel printing.
3
1. Install head, printing will start.
2. Press "Cancel" on DSC to cancel printing.
2
1. Press "Cancel" on DSC to cancel printing.
2
1. Disconnect the cable.
2
1. Disconnect the cable.
1
1. Press "Cancel" on DSC to cancel printing.
1
1. Press "Cancel" on DSC to cancel printing.
1
1. Press "Cancel" on DSC to cancel printing.
Customer Support
Error Recovering Method on DSC
Automatic
"Continue"
"Cancel"
Recovery
on DSC*
on DSC*
O
-
O
-
O
O
(Replace Ink)
O
O
(Adjust Lever)
O
(Replace Ink,
O
Adjust Lever)
O
(Replace Ink,
-
Adjust Lever)
O
-
(Resume Key)
O
-
(Resume Key)
O
-
(Resume Key)
O
-
(Close Cover)
O
-
(Install Head
-
-
-
-
-
-
-
-
-
-
-
-
O
O
O
O
O
O
O
O
O
O
O
O
O
-
O
O
O
36