BOLEX H Declic Manuale di istruzioni per l'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Camera Accessories BOLEX H Declic. BOLEX H Declic 6. Hand grip

Move the lever forward until the locking

catch (f) resumes its original position.

The hand grip is now firmly fitted to the

camera.

Adjusting the hand grip

The two stops (h) and (j) at the rear of the

platform prevent any movement of the hand

grip against the camerq base. The movable

stop (j) enables any play between the base

and the two stops to

b~eliminated.

Slightly

loosen the lever (b) and turn the hand grip

against the stop (h). Then loosen the screw

(k) and set the stop (j) against the base to

eliminate any existing play.

Tighten the:

screw (k) and the

lever.

(b)

Once this has

been

done,

the hand grip can be removed

and replaced very quickly at any time, as long

as the adapter is left on the base of the ca-

mera. The adapter can also be used with a

Bolex tripod (same method of attachment).

Using the hand grip

The two levers (I) and (m) limit the back and

forward movement of the release on the

hand grip.

Lever (I)

Turn the lever to the rear (backward travel

limited) for normal running.

The camera

stops when the finger is taken off the

trigger.

Turn the lever forward (maximum backward

travel) for continuous running when the

hand grip trigger is fully depressed - when

closing a scene with a fade-out, for example,

achieved with the help of the RX-Fader (Rexo-

fader) for H16 and H8 Reflex cameras.

Fig. 3