Bolide SVR9000s Series Manuale di configurazione

Sfoglia online o scarica il pdf Manuale di configurazione per DVR Bolide SVR9000s Series. Bolide SVR9000s Series 1. Dvr remote access

Stampa la pagina

DVR REMOTE ACCESS SETUP GUIDE

START HERE

IMPORTANT:

Setting up remote

access, DSL/Cable

internet service, a

router and a PC are

required. Some ISPs

may block incoming traffic,

please consult with your ISP when you have

any connection difficulties.

EASY SETUP STEP 1 - 2 - 3

Connect cameras to your DVR and plug in the net-

work cable from DVR to Router.

After setting up the IP in the DVR, go to your PC and log in to your

router (Router login information can be found in your router's user

manual). Once you have logged into your router, go under port for-

warding/firewall settings open the communication Port 80, 9000 and

point it to your DVR IP address, for example 192.168.1.100

Need More Help?

For information about features, please refer to the user manual for example settings and definitions. Additional product information can also

be found in the Product Manual on the CD. Please feel free to give us a call or simply log on to http://www.bolideco.com for more information

and support.

SVR9000s Series

Connection Diagram

LAN / Local Area Network

Once you have the connection ready, go to

main menu on the DVR > Network

Choose DHCP > APPLY > EXIT

Then reboot your DVR.

After the DVR is rebooted, you will receive an

IP address from the Router.

For example here: 192.168.001.100

*If you encounter IE Active X error, please go

to internet options > enable all Active X control

under security settings. Please also make sure

your computer is set to the same network mask.

To find out your network's IP, simply go to

http://www.whatismyip.com

Internet / WAN

Router

*If you did not get an IP

from router, simply repeat

Step 2 again and check

your network cable.

Bolide Technology Group

is a ISO 9001:2008 Certified Corporation