Cansec Zodiac LITE Manuale di istruzioni per l'installazione - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Controllori di accesso IP Cansec Zodiac LITE. Cansec Zodiac LITE 9. Biometric fingerprint reader

Stampa la pagina
8-PIN CONNECTOR
For wiring to a Wiegand controller or a Zodiac Door
-
Control Module
SET SCREW
Insert from bottom of reader after mounting on
-
mounting plate
DIP SWITCHES
DIP SWITCH #
ON
1
DCM MODE
2
Normal
Security
MODE
3
N/A
4
N/A
DCM MODE:
If you are connecting Zodiac Lite to ZDCM board, DIP switch # 1 has to be in ON position.
READER MODE:
If you are connecting Zodiac Lite to any Access Panel (CP40, SmartLock Pro or any 26-bit access panel),
DIP switch # 1 has to be in OFF position.
NORMAL SECURITY MODE:
By default setup DIP switch #2 is in ON position, in this case Zodiac performs a normal authentication process.
HIGH SECURITY MODE:
In this mode Zodiac performs a high authentication process.
If any changes are made at the DIP switch setting press RESET BUTTON to apply new setup.
OFF
READER MODE
High
Security
MODE
N/A
N/A
Zodiac LITE Installation Instructions
Page: 5/9
May 2008
Rev 1.5
!