Cansec P-620-HA Manuale di istruzioni per l'installazione - Pagina 10
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Lettore di schede Cansec P-620-HA. Cansec P-620-HA 14. Canprox proximity/keypad reader
Stampa la pagina
- 1. Table of Contents
- 2. Specifications
- 3. Introduction
- 4. Wall Mounting
- 5. Wiring - Cansec Controllers
- 6. Wiring - 3 Rd Party Controllers
- 7. Programming
- 7. P-640-HA & P-620-HA (26-Bit Wiegand Output)
- 7. P-640-HA37 & P-620-HA37 (Cansec 37-Bit Wiegand Output)
- 8. Proximity/Keypad Reader Usage
- 9. Card + PIN Interface Module - Optional
- 9. Card + PIN Usage
- 10. Reader/Keypad Troubleshooting
- 11. Appendix
Card + PIN Interface Module - Optional
NOTE: Card + PIN Interface Module (part number CA-CARD+PIN) is not included
with P-640-HA, P-620-HA or P-640-HA37, P-620-HA37. CA-CARD+PIN must be
purchased separately. The module and the PIN generation utility are not required
for MAP1 or MAP2 panels.
NOTE: Must program keypad to output 8-bit Wiegand. See Appendix for 8-bit burst mode.
The reader/keypad alone does not provide the Card + PIN feature also known as Two
Factor Authentication. Cansec developed the CA-CARD+PIN interface board which can
be purchased to allow Card + Pin capability to be added to access control units which
do not have that capability.
required to generate the PIN for the card
Software (available to download for free at cansec.com) is
.
CanProx Proximity/Keypad Reader
Installation Instructions
Page 10 of 14
August 2018 • Rev. 1.6