BOLTON Windsor Full Manuale di istruzioni per il montaggio - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Arredamento per interni BOLTON Windsor Full. BOLTON Windsor Full 8.

Step 3

Attach Back Safety Rail: Make sure the

pilot holes on the posts of the Back Safety

Rail (F) are facing the inside of the siderail

(side with the cleat). Position Back Safety

Rail (F) between 2 bed ends. Slide the

Safety Rail over Side Rail. Using Hex

Wrench (J), tighten the 80MM Hex Bolts

securing the bed ends to the side rails.

Secure Back Safety Rail to the bed ends

by inserting 50 MM Hex Bolt (S) into the

thru holes in safety rail posts, threading

them into the inserts in both bed ends -

tighten using Hex Wrench (J). Secure

safety rail posts to inside of side rail using

30 MM Wood Screw (K) - 2 places.

Attach Front Safety Rail: Make sure

the pilot holes on the posts of the Front

Safety Rail (E) are facing the inside of the

siderail (side with the cleat). Slide the

Front Safety Rail (E) over Side Rail.

Position front safety rail to left or right end

of bed.

Secure Front Safety Rail to bed ends by

inserting 50 MM Hex Bolt (S) into thru

hole in front safety rail post, threading it

into insert in bed end - tighten using Hex

Wrench (J).. Secure safety rail posts to

inside of side rail using 30 MM Wood

Screw (K) - 2 places.

Step 4

Position Upper assembly on Lower

Assembly: Insert Steel Dowel (P) into

predrilled holes in top rails/posts of Lower

Bed Assembly (4 places). Positon the

upper bunk bed assembly by Aliegning the

pre-drilled holes in bottom of bed post of

Upper Bed Assembly to the Steel Dowels

(P) in Lower Bunk Assembly. Seat the

Upper Bunk Assembly firmly down on top

of the Lower bunk Assembly.

249 Professional Drive, Morrisville, VT

Web Site: www.boltonfurniture.biz