Asus TUF B365M-PLUS GAMING Manuale - Pagina 13
Sfoglia online o scarica il pdf Manuale per Scheda madre Asus TUF B365M-PLUS GAMING. Asus TUF B365M-PLUS GAMING 28.
Anche per Asus TUF B365M-PLUS GAMING: Manuale di avvio rapido (2 pagine)
Stampa la pagina
Clear RTC RAM (2-pin CLRTC)
This header allows you to clear the CMOS RTC RAM data of
the system setup information such as date, time, and system
passwords.
To erase the RTC RAM:
1.
Turn OFF the computer and unplug the power cord.
2.
Use a metal object such as a screwdriver to short the two
pins.
3.
Plug the power cord and turn ON the computer.
4.
Hold down the <Del> key during the boot process and enter
BIOS setup to re-enter data.
If the steps above do not help, remove the onboard battery and short the two pins again
to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.
System panel connector (20-5 pin PANEL)
This connector supports several chassis-
mounted functions.
USB 2.0 connectors (10-1 pin USB910, USB1112)
Connect a USB module cable to any of these connectors, then install the module
to a slot opening at the back of the system chassis. These USB connectors comply
with USB 2.0 specifications and supports up to 480Mbps connection speed.
Serial port connector (10-1 pin COM)
Connect the serial port module cable to this connector, then install the module to a
slot opening at the back of the system chassis.
Digital audio connector (4-1 pin SPDIF_OUT)
Connect the S/PDIF Out module cable to this connector, then
install the module to a slot opening at the back of the system
chassis.
Chapter 1: Product introduction
CLRTC
PIN 1
PANEL
+PWR_LED-
SPEAKER
PWR_SW
PIN 1
+HDD_LED-
RESET
+PWR_LED-
* Requires an ATX power supply
PIN 1
SPDIF_OUT
1-4