Advance acoustic SC100 Linee guida operative - Pagina 2
Sfoglia online o scarica il pdf Linee guida operative per Scrubber Advance acoustic SC100. Advance acoustic SC100 2.
Anche per Advance acoustic SC100: Linee guida operative (2 pagine)
Stampa la paginaATTENTION! Do not use the machine before you have read and understood the Instructions for Use Manual.
The machine
doesn't work
as it should?
1. Check if the power supply cable is
The suction
doesn't work
as it should?
1. If applicable, check if the manual
The machine
doesn't clean
as it should?
1. Check if you have selected the right
The brush
doesn't work
as it should?
1. Check if the cylindrical brush is
9435 Winnetka Avenue North
240 Superior Boulevard
Brooklyn Park, MN 55445
Mississauga, Ontario, Canada L5T 2L2
www.advance-us.com
www.nilfisk-advance.ca
Phone 800-850-5559
Phone 800-668-8400
Fax 800-989-6566
Fax 800-263-5111
2. The main switch is broken. (*)
damaged, faulty or disconnected
from the electrical mains.
2. Check if the recovery tank is full.
suction hose connection is turned
to "OFF".
2. Check if the solution filter is dirty.
solution settings or the solution
Clean it if needed.
tank is empty.
correctly installed and not worn out.
Replace when necessary.
TROUBLESHOOTING
SC100
™
3. The push button panel is broken. (*)
3. Check if the squeegee bars are
dirty or the blades are worn or
damaged.
3. Check if the holes in solution
dispensers are clogged. Remove
them and clean if needed.
(*) For these causes the maintenance
procedure must be performed by an
authorized Advance Service Center.
For further information refer to the
Service Manual, available at any
Advance Service Center.
4. Check if the inspection compartment
is dirty. Check if the recovery vacuum
hose is disconnected or dirty.