Battery Supplies BAT/49495 Manuale - Pagina 8

Sfoglia online o scarica il pdf Manuale per Caricabatterie Battery Supplies BAT/49495. Battery Supplies BAT/49495 12.

MANUAL

Instructions and Status Display

The operation steps are as follows:

Step 1: Connect with the power, the control box starts to be energized, the blue light bar is

always on, and the screen will display the gear and status.

Step 2: Connect the vehicle and insert the plug into the vehicle socket. The control panel

will automatically detect the connection status of the vehicle. After the connection is

successful, the connection indicator (green) will be turned on and kept constant, and the

screen will display the insertion status.

Step 3: Start charging and establish communication with the vehicle. Vehicles confirm the

control box on the cable by detecting the duty ratio of PWM signal

Maximum power current, charge indicator (green) breathing, screen will switch cycle

display power, electricity, temperature and charging time.

Step 4: Monitoring the charging process. During the charging process, the current,

leakage current and temperature of the cable control box during charging process are

monitored. If a fault occurs, the cable control box cuts off the power supply, stops charging,

the indicator (red) flickers, and the screen will display the fault name.

Step 5: Charging is over. The control box on the cable cuts off the power supply and stops

charging.

Waiting for charging indicator

Connection indicator

Charging indicator

Fault notification

Nijverheidslaan +50/56, B-8540 Deerlijk - BELGIUM

Tel +32 56 617 977 - Fax +32 56 617 955

[email protected] - www.batterysupplies.be

LED Status

Blue light is on constantly

Green light is on constantly

Green light flashes

Red light flashes

BAT/49494 -

BAT/49495