Dagger Touring Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Barca Dagger Touring. Dagger Touring 16. Recreational kayak
Anche per Dagger Touring: Manuale d'uso (12 pagine), Manuale d'uso (20 pagine)

Stampa la pagina

/ M

ARE

AINTENANCE

CARE

Our rotomolded kayaks are made of high-

density linear polyethylene, which is virtually

maintainance free. A minimal amount of care

in storage and transporting will help the kayak

maintain a like-new condition for many years.

WHITEWATER CARE

Whitewater kayaks are built to withstand more

aggressive use than recreation or touring

models. However, a certain amount of impact

and abrasion damage is to be expected due to

the nature of whitewater paddling.

Continual exposure to abrasion can roughen

the hull surface. Scratching is often cosmetic or

superficial and requires no repair.

It is important to be able to determine when

damage is cosmetic or extends to impacting

the structure of the hull. Impacts are much more

likely than scratches to result in structural damage.

Inspect your hull after suffering a collision.

As strong and durable as it is, polyethylene is

not indestructible. However, should the worst

happen, it is repairable – simply contact your

local Dagger dealer.

CLEANING

Usually, a quick rinse of fresh water is all that

is necessary to keep your kayak clean and

functioning in good order. This is very important

after paddling in salt water. Be sure to rinse the

skeg, cables, and foot braces with fresh water

to remove salt residue. To minimize long-term

degradation caused by UV exposure, use an

ultraviolet protectant such as 303 Protectant,

available at your local dealer or HarmonyGear.com.

REPAIR OPTIONS

Although it is unlikely that your Dagger kayak

will need any repairs during its lifetime, it is pos-

sible that a hull crack or puncture may occur due

to extreme impact or contact with a sharp ob-

ject. If this happens, contact your local Dagger

dealer to determine if the damage falls under

the boat's warranty (see warranty section).

We will need the serial number of your kayak, a

good description of the damage (a photograph

is required) and a description of the incident

during which the damage occurred. All of this

information will help us determine the best

course of action.

HULL DISTORTION

Polyethylene will become more flexible when

in warm conditions such as a hot, sunny day.

Improper storage or transportation of a plastic

boat, especially in the heat, can potentially

distort the shape of the hull on your boat.

If your kayak does become the victim of slight

distortion, correction is a simple process. Brief

exposure to the heat of the sun is often all it

takes to restore the hull to its original shape.

If that doesn't work, the hull can usually be

restored by applying heat to the outside of the

boat with a hair dryer. Take care – high, focused

heat could cause damage.

When the hull is pliable enough, it can be

pushed back into shape by hand. A weight can

be placed inside the boat to maintain the shape

of the hull as it cools. Allow 24 hours to ensure

the process is completed.

WARNING

Avoid dragging your kayak across the

ground to prolong its life and maintain its

look and performance. Two people, using the

carrying handles, is the best way to trans-

port a longer kayak.