Dotsmann DCF-77 Manuale di istruzioni - Pagina 8

Sfoglia online o scarica il pdf Manuale di istruzioni per Stazione meteorologica Dotsmann DCF-77. Dotsmann DCF-77 16. Wireless 433mhz weather station

Press the IN key to select the "12h" or "24h" display mode.

Press the SET again to confirm and to enter the "Manual Time setting" or

exit the setting mode by pressing the CH key.

Note: When 24h mode display is selected, the calendar format will be date and

month display.

When 12h mode display is selected, the calendar format will be month and

date display.

MANUAL TIME SETTING

Hours (flashing)

In case the Weather Station is not able to detect the DCF-signal (disturbances,

transmitting distance, etc.), the time can be manually set. The clock will then work

as a normal Quartz clock.

To set the clock:

The hour and minutes digits start flashing in the time display section.

Use the IN key to adjust the hours and the OUT key to adjust the minutes. If

you hold the key while you adjust, the hours move 1 hour and the minutes

move 5 minutes.

Confirm with the SET key and enter the "Calendar Setting" or exit the setting

mode by pressing the CH key

Note:

The unit will still try to receive the signal at each full hour despite it being manually

set. When it does receive the signal, it will change the manually set time into the

received time. During reception attempts the DCF tower icon will flash. If reception

has been unsuccessful, then the DCF tower icon will not appear but reception will

still be attempted the following hour.

Date (flashing)

Month (flashing)

The date default of the Weather station is 1. 1. of the year 2003. Once the radio-

controlled time signals are received, the date is automatically updated. However, if

the signals are not received, the date can also be set manually. To do this:

Using the IN key, set the year required. The range runs from 2003 to 2039

(default is 2003).

Press the SET key to enter the month and date setting mode.

Press the IN (or OUT) key to set the date and the OUT (or IN) key to set the

month required.

Minutes (flashing)

Year (flashing)