DOTWORKZ COOLDOM ST-CD Manuale di installazione - Pagina 6

Sfoglia online o scarica il pdf Manuale di installazione per Camera Accessories DOTWORKZ COOLDOM ST-CD. DOTWORKZ COOLDOM ST-CD 17. S-type cooldome enclosure

Stampa la pagina

Only Use Qualified Installation or Service Technician for Installing & Servicing Dotworkz Enclosures.

Power Must be disconnected and kept off while installing or Servicing Enclosure.

Follow All Local and Applicable Electrical Codes and Standards for Installation of Electrical components.

All Cable Ports, wire feeds, or Conduit must be fully sealed to eliminate moisture within Enclosure.

All Dotworkz Enclosures are required to be fully sealed before placing into service, to protect integrated products, to

eliminate any moisture driven shock hazard, to perform optimally as designed.

DRIP LOOPS

Cable Gland Strain Relief Port Seals

To properly seal, Dotworkz Cable Gland Strain Relief Ports will only accept One single round cable per port

* SJOOW

* Cat5/ Cat6

* Coaxial

Cable can be multi-conductor in single round cable bundle such as Cat5/ 6e (burial rated), or Conductor cable SJ00W (water rated)

Conduit

Proper Cable Management to Enclosure

Avoid common Installation Mistakes

Use Round Cable Only with

provide Cable Gland Port Seal

If Conduit is used in Lieu of Cable Gland Port Seals provided,

Then Use Only Liquid Tight Conduit & fittings properly sealed.

Internal Wire feeds must be fully sealed prior to placing Enclosure into Service.

See Conduit Guidelines section of this manual.

Always Create a Drip Loop for all Cables or Conduit Entering

Dotworkz D2 Housing from level or Above D2

Conduit, Power, Data, & Antennae

To avoid gravity driven moisture entry into Enclosure

Romex

Flat Cable

Dotworkz Standard Cable Gland Port

Seals are designed for ONE single round

cable only per port