Baumer OADM 20I6591 Manuale d'uso - Pagina 27

Sfoglia online o scarica il pdf Manuale d'uso per Accessories Baumer OADM 20I6591. Baumer OADM 20I6591 48. Laser distance sensor

2 Functional principle

The distance measured is based on the triangulation principle. The emitted laser beam falls on the object as

a small light spot and will be reflected diffusely. The position of the received light spot on the receiver (a

diode line) defines the receiving angle. This angle corresponds to the distance and is the base for the

internal calculations.

A distance change close to the sensor effects a large change in angle; the same distance change at the end

of the measuring range has a much smaller effect to the angle. This non-linearity feature is linearized by the

microcontroller. The analog output signal is linear to the distance.

The sensor adapts automatically to different object colors by varying the emitting laser intensity and

optimizing the exposure time. The result is a sensor that is nearly independent on different reflections

(different colors, shiny surfaces, dark objects). The sensor reaches its highest accuracy if the object reflects

diffusely.

• For a proper mounting, the mounting surface has to be flat. Be aware of the max. tightening torque.

• In case of EMC, the sensor has to be grounded and a shielded cable has to be used.

• The 90° rotating connecter allows wiring the senso r from the bottom side or from the rear.

• The max. accuracy will be reached >15 minutes after power on.

Manual_OADM20x659_DE_EN.doc

04.12.12

Diode line with

receiving light spot

Object close to sensor

Object far away

27/48

Baumer

Frauenfeld, Switzerland