Baumer OM30 Manuale operativo - Pagina 26

Sfoglia online o scarica il pdf Manuale operativo per Accessories Baumer OM30. Baumer OM30 48. Laser distance sensors

Functions

8.3

Zero position

You can use the Zero position function to specify the position of the zero position. This position

is the reference point for distance measurement (from the front of the sensor housing, negative

values are not permissible). The function can be used, e.g., to carry out reference measure-

ments (relative measurement).

The zero position is the basis for the output distance, the analog value (unchanged scaling),

and the switching points. If the zero position is shifted, the analog window and the switching

points are automatically shifted, since the "numerically" configured values are maintained.

IO-Link parameter: Zero position

Parameter name

Zero Position.Zero Position

Baumer commands – Zero Position Teach

8.4

The purpose of the Measurement range function is to mask objects that are not wanted for the

measurement (e.g. transparent materials with the measurement range). You can adjust the

measurement range limits within the maximum limitation of the sensor (MR).

The Near limit of the measurement range must be larger than the minimum limitation of the

sensor (Sdc).

The Far limit of the measurement range must be smaller than the maximum limitation of the

sensor (Sde).

The alarm output is activated as soon as no measurement object is located within the config-

ured measurement range or the signal quality is insufficient.

IO-Link parameter: Measurement range

Parameter name

Measurement Range. Distance Near

Measurement Range. Distance Far

Values Description

Operating Manual

Values Description

Zero position

Teach in the current position as

the new zero position.

Near limit of the measurement range

Far limit of the measurement range

Baumer

OM20/OM30 | V1