Asus AAM6030EV Manuale di istruzioni per l'installazione rapida - Pagina 13

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione rapida per Router di rete Asus AAM6030EV. Asus AAM6030EV 13.

wireless clients match and don't clash with the wired clients. e.g. if the router is 192.168.1.1 (as set in Quick Setup/Ethernet)

and you have two wired clients with addresses 192.168.1.2 and 192.168.1.3 then typical addresses for wireless clients would

be 192.168.1.4 and 192.168.1.5. BUT you could not use the addresses 192.168.0.2 and 192.168.0.3. This wouldn't work and

the wireless clients wouldn't be able to see the router or the wired clients.

Routed Mode – in this mode the wireless segment forms a discrete, separate network from the wired section but IP routeing

between the two networks is allowed. Since the wireless network is a separate network then the wireless point at the router

needs to be given an IP address. e.g. the wired segment might have 192.168.1.1 for the router end and then clients could be

192.168.1.2 or 192.168.1.3 etc.. Then you could tell the WLAN Configuration that the IP address of the wireless point at the

router is 192.168.0.1 (with mask 255.255.255.0) and then use client addresses of 192.168.0.2 or 192.168.0.3 etc...

Remember to select Submit after doing any changes and then Reset the modem before using.

If using Routed Mode and you want to use DHCP then remember to goto Network Service/DHCP Server and configure the

WLAN server.

- 14 -