Electric Eel Model C Manuale operativo - Pagina 5
Sfoglia online o scarica il pdf Manuale operativo per Pulitore a ultrasuoni per gioielli Electric Eel Model C. Electric Eel Model C 6. Electric sectional drain snake
Stampa la paginaStep
1
If at all possible, the nature and approximate location of the stoppage should be determined before starting the job.
Usually a drain or sewer line obstruction is removed by running the cleaning tool downstream until obstruction is reached.
2
The cleaning tool should be chosen according to the enclosed information for the line size being cleaned.
3
The cleaning tool reduces the obstruction to small pieces, which are then washed downstream by the flow of water.
In such cases, after clearing the obstruction, you should use as much water in the line as possible.
4
Check for clean outs – and, where possible, avoid traps by using an opening beyond the trap.
5
Wheel the machine into the space where the work is to be done.
6
Connect the proper cleaning tool to the first section of cable and insert into the line to be cleaned. Continue to connect
and insert additional 8' sections and feed by hand into line until resistance is met then attach cable to machine.
BEFORE TURNING ON THE MOTOR, BE SURE MOTOR SWITCH IS IN FORWARD POSITION.
7
If the opening is trapped, you must use the feeding tool to start the cable into the line. The FEEDING TOOL is held
against the rotating cable so that the cable feeds into the pipeline far enough to gain its own footing. Remove the
starting switch from the bracket and use it and the feeding tool as shown in Figure 1 on the Tool Application Page.
8
As soon as the cleaning tool has negotiated the trap, shut off the motor and return the switch to the bracket.
AVOID "P" traps in 3" diameter pipelines as they can cause severe cable damage.
9
To add additional 8' cable sections use the following procedure, but NEVER add more than ONE 8' SECTION of
cable at a time between sewer opening and machine. Feed the added section into the pipeline until the machine is two
or three feet from the opening. Then add another length of cable. The open spaced, right hand wound construction of
the outer cable member provides a self-feeding action and exerts an even pressure against the pipeline stoppage. If the
safety clutch slips, put the machine in reverse and back away momentarily from the obstruction.
Customer Safety and
Operation Guide
Electric Eel Model C
Electric Sectional Drain Snake
Follow the steps below to operate the tool:
Action
Email:
Website:
www.electriceel.com