Electric Eel RF Series Manuale operativo e di sicurezza del cliente - Pagina 2

Sfoglia online o scarica il pdf Manuale operativo e di sicurezza del cliente per Pulitore a ultrasuoni per gioielli Electric Eel RF Series. Electric Eel RF Series 2. 100 ft. auto feed electric drain cleaner 5/8” & 3/4”

Stampa la pagina
Electric Eel RF Series Manuale operativo e di sicurezza del cliente
Follow the steps below to operate the tool
Step Action
1
WITH POWER OFF, attach a small spear-type cleaning tool to the end of the cable. This tool will enable
you to bore a starter hole in the obstruction, allowing backed-up water to drain.
2
Place machine cable guide spring at pipe opening. NEVER have exposed cable.
3
Position foot actuator for easy operator accessibility.
4
To operate the feeder motor, switch must be in FORWARD position.
Place one HEAVY leather gloved hand on cable guide spring to control cable as it rotates inside; and use
5
the other hand to work the feeder control lever.
DANGER:
Operator must keep one HEAVY leather gloved hand on cable guide at all times during operation.
6
WITH POWER ON, in order to feed cable, the operator must move the feeder control lever from NEUTRAL
(the position midway between FORWARD and REVERSE) to the FORWARD position, while depressing
the foot actuator.
NOTE: The speed at which the cable is fed initially can be controlled by moving the control lever toward
FORWARD to increase speed and moving back toward NEUTRAL to slow speed.
NOTE: If the feeder control lever is initially put in FORWARD but the cable is not advancing, then turn the
cable tension knob in a clockwise direction until the cable begins to advance.
7
Continue to automatically feed cable until obstruction is met. When cable begins to drag or rotation be
comes difficult, move the lever to the NEUTRAL position and allow tool to cut away at the obstruction.
DANGER:
NEVER force the cable or tool into the obstruction.
8
If tool becomes hung up in the obstruction, move control lever to the REVERSE position to back out tool.
9
After tool has been removed from obstruction, move control lever back to the FORWARD position and
continue to work through obstruction.
To retrieve cable from line, move control lever to the REVERSE position (while continuing to operate cage
10
in forward rotation) and cable will back out of line and feed into cage.
NOTE: It is recommended that you use a continuous flush of water to clean tool, cable and sewer line as
cable is retrieved.
11
When tool is close to cleanout opening, return Control Lever to NEUTRAL position, release foot actuator
and allow machine to come to a complete stop. DISCONNECT POWER CORD.
12
Pull remaining cable and tool from drain/sewer line and hand feed cable back into machine.
OPERATOR'S MANUAL and MORE INFORMATION AVAILABLE AT:
Tool Application:
Clears 3" through 6" diameter drain lines up to 100 Ft.
and features a two-way auto cable feed for ease of operation.
2
Standard Tools Included with the Model RF Kit:
1.
SC-18 Spanner Wrench
2.
HDD-7 Retriever Tool
3.
U3H Grease Tool
4.
HDD-3S Root Saw
Toll-Free: 800-833-1212
1
3
4
5
6
5.
A-1DC Starting Drill Tool
6.
1-FLSC1SC2 Flexible Leader
for Negotiating P-Traps
www.electriceel.com