Asus XD4S Manuale di avvio rapido
Sfoglia online o scarica il pdf Manuale di avvio rapido per Router di rete Asus XD4S. Asus XD4S 2. Ax1800 dual band wifi router
Stampa la pagina
Quick
Start Guide
ASUS ZenWiFi XD4S
AX1800 Dual Band WiFi Router
Model: XD4S
Before Setup
Preparing to set up an AiMesh WiFi system
Find three ZenWiFi XD4S, and power them on.
1
Use a network cable to connect your modem to the WAN port of one XD4S. This ZenWiFi XD4S will
2
be the AiMesh router, and the other two ZenWiFi XD4S will be the AiMesh nodes.
The LED turns solid blue to indicate that ZenWiFi XD4S is ready for setup.
3
ASUS Router App
Download free ASUS Router APP to set up and
manage your router(s).
AiMesh Setup Steps
01
Prepare
Place your AiMesh router and nodes in the same room and at
least 1 meter apart during the setup process.
02
AiMesh node
Keep your AiMesh nodes powered on and standby for AiMesh
system settings.
03
Launching ASUS Router APP
Launch ASUS Router APP, and then follow the on-screen
instructions to finish the AiMesh setup.
Troubleshooting
If your AiMesh router cannot find any AiMesh nodes nearby or synchronization
fails, please check the following and try again.
Move your AiMesh nodes closer to the AiMesh router ideally. Ensure that it is within 3 meters.
a
Your AiMesh nodes are powered on.
b
Hardware Explanations
Plug the adapter into the DCIN port.
1
The power LED will light up when your hardware is ready.
2
XD4S Overview
LAN port
DCIN port
WAN/LAN port
Specifications:
DC Power adapter
DC Output: +12V with max 1.5A current
Operating Temperature
0~40
Operating Humidity
50~90%
AiMesh node
At least
1 meter
AiMesh node
WAN/LAN port
Connect your modem to this port
with a network cable.
LAN port
Connect your PC to a LAN port with
a network cable.
C
Storage
0~70
C
o
o
Storage
20~90%
AiMesh node
AiMesh router
AiMesh Setup Steps
At least
1 meter
AiMesh node
AiMesh router