Baumer PMG10P Manuale operativo - Pagina 24

Sfoglia online o scarica il pdf Manuale operativo per Convertitore multimediale Baumer PMG10P. Baumer PMG10P 44. Absolute encoder
Anche per Baumer PMG10P: Istruzioni per il montaggio e il funzionamento (32 pagine), Istruzioni per il montaggio e il funzionamento (36 pagine), Istruzioni per il montaggio e il funzionamento (32 pagine), Manuale operativo (44 pagine), Manuale operativo (40 pagine), Manuale operativo (40 pagine), Manuale operativo (40 pagine), Manuale operativo (36 pagine)

Stampa la pagina
Baumer PMG10P Manuale operativo
6
|
Electrical installation
6.8

Electrical connection with radial terminal boxes

6.8.1

Connecting the supply cable

NOTICE
Equipment damage due to dust or moisture
Inappropriate cable diameters may entail ingress of dust or moisture. In this case, the protection
class is no longer ensured causing device failure or malfunction.
a) Use only appropriately sized cables to make sure the specified protection class is being en-
sured.
INFO
Connection cables are not included in delivery.
1
6
Ill. 10: Connecting the supply cable
1
3
5
Tools
t20
n
n
Instruction:
a) Loosen the screws at the terminal box.
b) Lift the terminal box off the encoder.
c) Loosen the cable gland at the terminal box.
24
2
3
Torx / slotted screw M4x32 mm
Terminal connector (wire cross-section
2
≤ 1.5 mm
)
Additional incremental output (optional),
speed switch (optional), programming
interface (PMG10P only)
Supply cables (cable diameter 5-13
mm)
22 mm
Operating Manual
5
2
4
6
4
Terminal box cover
Cable shield
Cable gland M20x1.5 mm (for cable di-
ameter 5-13 mm)
PMG10 & PMG10P SSI | V1
Baumer Hübner