Baumer PMG10P Manuale operativo - Pagina 23

Sfoglia online o scarica il pdf Manuale operativo per Convertitore multimediale Baumer PMG10P. Baumer PMG10P 40. Absolute encoder
Anche per Baumer PMG10P: Istruzioni per il montaggio e il funzionamento (32 pagine), Istruzioni per il montaggio e il funzionamento (36 pagine), Istruzioni per il montaggio e il funzionamento (32 pagine), Manuale operativo (44 pagine), Manuale operativo (44 pagine), Manuale operativo (40 pagine), Manuale operativo (40 pagine), Manuale operativo (36 pagine)

Stampa la pagina

Baumer Hübner

6.2.3

Switching level additional output incremental (optional)

Switching level

High/Low

Transmission length

Output frequency

The TTL/HTL output (Vin = Vout) at the additional output II incremental is galvanically iso-

lated and requires a separate voltage supply.

Tab. 1: Switching level additional output incremental (optional)

6.2.4

Programming interface (only for programmable variant)

Encoder parameters such as additional output, switch-off and switch-on speeds or also the

switching hysteresis can be changed and read out via connection SA and SB. The Z-PA.SDL1

WLAN adapter can be used for encoder access via web browser.

Also see about this

2 Z-PA.SDL.1 WLAN adapter: Programming device for HMG10P/PMG10P [} 27]

6.2.5

LED activity indicator

LED

INC1

INC2 (additional output incre-

mental

Status

Speed

Tab. 2: LED activity indicator

V1 | PMG10 & PMG10P EtherNet/IP

TTL/RS422

≥ 2,5 V / ≤ 0,5 V

≤ 550 m bei 100 kHz

≤ 600 kHz

red

No function

Undervoltage

Overload

Excess temperature

Internal error

Speed higher than switching

speed (overspeed)

Operating Manual

Electrical installation

TTL/HTL (Vin = Vout)

≥ 2,5 V / ≤ 0,5 V (TTL)

≥ Ub − 3 V / ≤ 1,5 V (HTL)

≤ 550 m bei 100 kHz (TTL)

≤ 350 m bei 100 kHz (HTL)

≤ 600 kHz (TTL)

≤ 350 kHz (HTL)

green

No function

Speed below switching speed