Douglas Lighting Controls WRS-2224 Manuale di istruzioni - Pagina 9

Sfoglia online o scarica il pdf Manuale di istruzioni per Scanner Douglas Lighting Controls WRS-2224. Douglas Lighting Controls WRS-2224 20. Programmable relay scanner

Stampa la pagina

Setup: Program Mode

PROGRAM MODE

Allows output relays to be grouped, with each group

controlled by a switch input.

To Use Program Mode:

1. Make sure the output relays are properly connected to the output

terminals and that the group switches and/or timer outputs are

properly connected to the input terminals.

2. Make sure NORMAL MODE is selected. The top indicator LED of

the NORMAL MODE select button should be ON.

3. Use the INPUT SELECT button to scroll to the desired input #1-5

(when its indicator INPUT LED is ON).

4. Press the PROGRAM MODE select button. Its indicator light will

begin flashing. The OUTPUT LEDs of the relays that are controlled

by the selected input will be ON.

5. Add or remove output relays from the selected input by pressing

the OUTPUT button of the desired relay.

6. When you have selected all the relays for the group, press the

NORMAL MODE select button to return to NORMAL mode.

7. Repeat steps #3 - 6 to program other inputs with a relay group.

NOTE: A relay can be in more than one group.

8. When you are programming a relay group, you can include or

exclude all the output relays by pressing the ON OVERRIDE or OFF

OVERRIDE button, respectively.

9. When you are in NORMAL mode, you can turn all the relays

assigned to an input ON or OFF by selecting that input with the

INPUT SELECT button, and then pressing the ON OVERRIDE or

OFF OVERRIDE button.

NOTE:

If there is 2 minutes of inactivity during

PROGRAM mode, the scanner will revert to

NORMAL mode.

To return to PROGRAM mode, press the

PROGRAM MODE selectbutton.

WRS-2224: Directions & Applications

Output

Buttons

page 7

Output

LEDs

Program Mode

Select Button

Normal Mode

Select Button

ON Override

Select Button

OFF Override

Select Button

Input

Select Button

Input

Terminals

Input

LEDs

DOUGLAS

lighting controls