Baumer OM30 Manuale operativo - Pagina 18

Sfoglia online o scarica il pdf Manuale operativo per Strumenti di misura Baumer OM30. Baumer OM30 48. Laser distance sensors

Installation instructions

INFO

You can find the suitable installation accessories on the Baumer website. Go to

www.baumer.com

website.

For measurement objects with shiny surfaces: Tilt the sensor 6 to 10° to the side so that the

light directly reflected by the surface does not hit the receiver of the sensor.

For mounting, use at least 1 tooth lock washer to break open the paint layer of the sensor.

Screws:

Torque:

Mounting the sensor near a wall or a machine component:

Mount the sensor parallel to the wall to prevent disruptive reflections.

Measurement objects with height differences / measurements in holes or cracks:

Mount the sensor in such a way that the reception beam is not interrupted by the step.

for this. Then enter the item number of the sensor in the search field of the

OM20

2 × M3

0.6 Nm ±10 %

Operating Manual

OM30

2 × M4

1 Nm ±10 %

OM20/OM30 | V1

Baumer