Asus AP5000 Manuale di installazione - Pagina 27

Sfoglia online o scarica il pdf Manuale di installazione per Server Asus AP5000. Asus AP5000 32. Dual pentium ii server platform

III. Integration Procedures

Integrating with the housing

The housing could carry two Back Plane Boards to support eight SCSI

drives in total, and the first Back Plane Board has to be placed on lower

position of housing (Fig 3-33) and its two notches should connect to the

openings housing with no space in between (Fig 3-34), so that it could en-

large the force while inserting the drive bay. The second Back Plane Board

also has to use similar method mentioned above for the connection. Next,

fix them by screwing in the back and front of hosing as shown in Fig 3-35.

Finally connect SCSI cables and power cables to the Back Plane Boards,

and fix the SCSI cable on the cable clamps to prevent the conflict of re-

moval or installation of Fan Frame (Fig 3-36)

If you are installing one back plane board into the system, connect the SCSI

cable connector to the on-board SCSI connector directly.

If you are installing two back plane boards into the system, insert another

SCSI card and connect the two SCSI cables to it.

Fig 3-33: Place the first back plane board outside in the system from the front door.

Second back plane board

Fig 3-34: Installing the second back plane board

Fig 3-35: Secure the two back plane boards onto the chassis

ASUS AP5000 Installation Guide

First back plane board

The screws of the second back plane board

The screws of the first back plane board

Housing