Amphenol C2LINX Series Manuale rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale rapido per Hardware di rete Amphenol C2LINX Series. Amphenol C2LINX Series 3. Pre-terminated
Anche per Amphenol C2LINX Series: Manuale d'ordine (9 pagine)

Stampa la pagina

NOTE: All illustrations show a left-side installation.

1. Remove top cover, corner pieces and outer box

from the packaging to expose spool and cable.

2. Remove cellophane wrap from the spool and cable.

WARNING! Keep all objects and personnel clear.

3. Hold stub end of yellow IFC cable. Spool will spin

freely as you begin to pull cable out.

4. Continue pulling IFC cable until one wrap is left on

the upper spool.

5. Remove rack-mount slide bracket from packaging.

Install in the front of the rack at correct RU space

Remove protective square foam from chassis

brackets.

NOTE: Ensure brackets are in final locations

as the chassis is not easily moved once fully

installed.

Front

6. Using a Phillips head screwdriver, install the

brackets onto the rails with the 12-24 screws

provided.

C2LINX

Pre-Term

NOTE: Do not tighten securely to the rack,

allowing easier alignment for chassis to slide into

correct position.

ALERT! When holding yellow IFC cable, do

not overbend or twist cable, it will damage

the fiber.

7. Cut and remove zip tie that is securing the fiber

to the cardboard on top of spool. Remove the

two supporting pieces of cardboard from the top

of the spool while maintaining the fiber bend

radius.

WARNING! DO NOT grab chassis by fiber

Lift chassis up and out of protective packaging

9. Align rail guides attached to the chassis to the

pre-installed mounting brackets from the rear of

rack.

509.926.6000 — amphenol-ns.com

Rear

Amphenol Network Solutions