Amphenol RESMLAC 28 MG Manuale di installazione - Pagina 7
Sfoglia online o scarica il pdf Manuale di installazione per Router di rete Amphenol RESMLAC 28 MG. Amphenol RESMLAC 28 MG 15. Ip67 rugged ethernet managed switch
Anche per Amphenol RESMLAC 28 MG: Manuale di installazione (15 pagine)
Stampa la pagina
Backshell
1. Prepare the cable for termination process and slide onto
the cable the items in the order shown on figure 1.
2. Screw the backshell at the rear of the connector.
3. Fold back the braid on the outer jacket and fix it (figure
2).
4. Install the braid as shown on figures 3 and 4:
Release the braid and cover the backshell (a) and the
connector's shell. Slide the first ring (b) over the braid.
Fold back the braid on the ring (b) and slide the second ring
(c) over the braid and the first ring (b). Screw the last ring
(d) at the rear of the backshell. If necessary, fix the extra
braid on the outer jacket of the cable. If this installation
(double folding of the braid) is not possible, refer to figure
5: Slide the first ring (b).
Release the braid and cover the backshell (a) and the
connector's shell. Cut the braid as shown. Slide the second
ring (c) over the braid and the first ring (b).
Screw the last ring at the rear of the backshell.
5. Install the heat-shrink molded piece.
RESMLAC 28MG IG rev. 1.1
Amphenol
– 948, Promenade de l'Arve – B.P. 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 – www.rjswitch.com
We suggest using TVNSA backshells with corresponding heat shrinks to come with
the TV06RW1304S plug for power..
These backshells, providing an electrical continuity between cable and connector,
ensure a high level or of EMI/RFI protection. The sealing is ensured by straight heat
shrink molded piece at the rear of the backshell. NSA and SA backshells ensure the
shielding by clamping the braid with a screwing system. The free inner ring avoids
twisting of the braid during screwing.
Heat-shrinks are molded pieces for harsh environment, fluid resistant (with
preinstalled adhesive).
Backshell designation: TVNSA 13 014
Heat shrink designation: 804223
Plug size
A length
mm (in)
35.60
13 (C)
(1.402)
TVNSA backshell assembly instruction
TVNSA backshell dimensions
A thread
B max
Metric
mm (in)
M18x1.0
22.70
-6H
(0.894)
Page 7 of 14
C max
Ø E max
Ø G max
mm (in)
mm (in)
12.70
21.64
(0.500)
(0.852)
Last Rev: 28-Nov-11
mm (in)
22.60
(0.890)