Amphenol RJS-ML-MG7F3G-PSM Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Router di rete Amphenol RJS-ML-MG7F3G-PSM. Amphenol RJS-ML-MG7F3G-PSM 15. Ip65/68 sealed managed rugged ethernet switch

Stampa la pagina

Backshells

Plug size

9 (A)

1. Prepare the cable for termination process and slide

onto the cable the items in the order shown on figure 1.

2. Screw the backshell at the rear of the connector.

3. Fold back the braid on the outer jacket and fix it

(figure 2).

4. Install the braid as shown on figures 3 and 4:

Release the braid and cover the backshell (a) and the

connector's shell. Slide the first ring (b) over the braid.

Fold back the braid on the ring (b) and slide the second

ring (c) over the braid and the first ring (b). Screw the

last ring (d) at the rear of the backshell. If necessary, fix

the extra braid on the outer jacket of the cable. If this

installation (double folding of the braid) is not possible,

refer to figure 5: Slide the first ring (b).

Release the braid and cover the backshell (a) and the

connector's shell. Cut the braid as shown. Slide the

second ring (c) over the braid and the first ring (b).

Screw the last ring at the rear of the backshell.

5. Install the heat-shrink molded piece.

Managed Switch Hardware Manual

Amphenol

– 948, Promenade de l'Arve – BP 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 www.rjswitch.com

We suggest using TVNSA backshells with corresponding heat-shrinks. See previous page for

part numbers.

These backshells, providing an electrical continuity between cable and connector, ensure a

high level or of EMI/RFI protection. The sealing is ensured by straight heat-shrink molded

piece at the rear of the backshell. NSA and SA backshells ensure the shielding by clamping

the braid with a screwing system. The free inner ring avoids twisting of the braid during

screwing.

Heat-shrinks are molded pieces for harsh environment, fluid resistant (with preinstalled

adhesive).

TVNSA backshell dimensions

A length

A thread

mm (in)

Metric

35.60

M12x1.0

-6H

(1.402)

TVNSA backshell assembly instruction

B max

C max

mm (in)

16.70

6.90

(0.658)

(0.272)

Page 8 of 14

Ø E max

Ø G max

mm (in)

15.62

16.50

(0.615)

(0.650)

Last Revised: 25-Jun-13