Amphenol Telect 009-7001-0104B Manuale di installazione - Pagina 6

Sfoglia online o scarica il pdf Manuale di installazione per Hardware di rete Amphenol Telect 009-7001-0104B. Amphenol Telect 009-7001-0104B 15. High-current demarcation panel

Stampa la pagina

1.4 Installation

NOTES:

Amphenol Network Solutions ships 009-7001-0104B panels without installed fuse holders or fuses.

•

Amphenol Network Solutions includes blank covers over the empty fuse holder positions. Amphenol

Network Solutions ships 009-7001-0104B panels without installed fuses.

Fuse holders without fuses are sold separately. Order fuses and fuse holder at amphenol-ns.com. Fuse

•

part numbers are shown on page

•

For safety, install blank covers over all unused fuse positions on model 009-7001-0104B.

Amphenol Network Solutions recommends that circuit breakers or fuse holders — without fuses — be

•

installed prior to mounting the panel on the rack. Amphenol Network Solutions recommends not mixing

circuit breakers and TFD fuse holders in the same panel. (TFD fuse holders are for TPS or TLS fuses.

TPS and TLS fuses are compatible, but are made by different manufacturers.)

1.4.1 Important Installation Guidelines

•

Elevated Operating Ambient Temperature: If you install the rack in a closed or multi-unit rack

assembly, the operating ambient temperature of the rack environment may be greater than room

ambient. Take care to install the equipment in an environment compatible with the maximum

operating temperature.

Reduced Air Flow: Maintain the amount of air flow required for safe operation when installing the

•

equipment in a rack.

Mechanical Loading: Ensure mechanical loading is even to prevent hazardous conditions.

•

Circuit Overloading: Overloading circuits may affect your overcurrent protection and supply wiring.

•

Use equipment nameplate ratings.

Reliable Earthing: Maintain reliable earthing or rack-mounted equipment. Pay attention to supply

•

connections other than direct connections to the branch circuit (e.g., use of power strips).

Disconnect Device: Incorporate a readily accessible disconnect device in the building installation wiring.

•

High-Current

Demarcation Panel

12.

Amphenol Network Solutions

509.926.6000 — amphenol-ns.com.com