AMPHIBICO Genesis Manuale di istruzioni - Pagina 7

Sfoglia online o scarica il pdf Manuale di istruzioni per Camera Accessories AMPHIBICO Genesis. AMPHIBICO Genesis 17. Housing for the sony nex fs-100

MOUNTING THE PORT
Before mounting the port on the housing always ensure that the port O-ring is clean, lubricated and proper-
ly seated in its groove and that he sealing surface on the housing is clean and free of physical damage.
The GENESIS HD Digital Housing System features a bayonet mount #13 equipped with a locking mechanism
#14 If there is already a port or extension mounted on the housing and you wish to remove it, simply pull
the lock lever (key 18) until it stop, rotate the port counter clockwise and carefully pull out, and put it aside
in a safe place with the port lens delicate surface protected.
To mount the port or extension ring simply:
1. Place the housing on its back on a soft steady surface.
2. Place the port or extension ring inside the main port of
the housing. Align one of the four alignment notches with the
opening of the housing.
3. Place your hands on opposite sides of the port or exten-
sion ring.
4. Push with even force on both sides of the port or extension
ring until you feel it snap into place. Make sure the bayonet is
completely inside the housing.
5. Turn the port clockwise until it stops. Do not force, if there
is too much resistance takes the port off, check the O-ring and retry.
6. Check to ensure for the proper seating and sealing of the port or extension and that it is safely locked
on the housing.
Note: It is recommended that you familiarize yourself with this mount by trying it without the camera;
this will allows you to see the inside view of the bayonet mount and of the ports or extension rings in the
housing.
Unlock
Press to
unlock
Page 6
Lock