Amphony RB1 Manuale d'uso e d'installazione - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso e d'installazione per Trasmettitore Amphony RB1. Amphony RB1 8. 2.4 ghz rangebooster transmitter

R R

User and Installation Guide

Step 4

Operating the RangeBooster transmitter

As soon as valid data is received via the data input, the transmit light will light

and the RangeBooster transmitter will broadcast a signal. When the primary

transmitter goes into standby mode or if no valid audio signal is received

anymore, the RangeBooster transmitter will go into standby mode after

approximately 1 minute and the transmit light will go out.

Transmit light

RangeBooster

2.4 GHz

R R

The RangeBooster transmitter has to be tuned in order to maximize

performance. Tuning will compensate for any data delays that occur while the

audio data travels through the data cable. These delays will depend on the

length of the data cable. If the RangeBooster is not tuned properly, crackling

and disruptions of the audio may occur in areas where an RF signal is

received from both the primary transmitter and the RangeBooster transmitter,

such as in areas that are located between the primary transmitter and the

RangeBooster transmitter.

Tuning is done by turning the "CABLE ADJUST" knob. This knob has 16

settings. Find the setting that produces the least amount of crackling and

audio interruptions.

Audio interruptions can also be minimized by changing the location of the

RangeBooster transmitter and primary transmitter (see page 2).

Tuning

DC 9V

CABLE ADJUST

DATA IN

Page 4