Tired of wiring your speakers ? Don't like the look of long speaker cables of your home
Tired of wiring your speakers ? Don't like the look of long speaker cables of your home
theater system ? Are you afraid of going wireless because of the low audio quality of
theater system ? Are you afraid of going wireless because of the low audio quality of
900 MHz analog wireless systems or possible interference from other wireless devices ?
900 MHz analog wireless systems or possible interference from other wireless devices ?
Then check out the next generation of 5.8 GHz Digital Audio Transmitter / Amplifier
Then check out the next generation of 5.8 GHz Digital Audio Transmitter / Amplifier
products from Amphony.
products from Amphony.
Most importantly, since the 5.8 GHz Digital Wireless Audio Transmitter from Amphony
Most importantly, since the 5.8 GHz Digital Wireless Audio Transmitter from Amphony
transmits a
transmits a data rate of over 3 Mbps (3 million bits per second) and since no audio
data rate of over 3 Mbps
compression is applied, you will experience true CD quality without audio degradation
compression
is applied, you will experience
which you are used to from MP3 as well as other audio compression schemes.
which you are used to from MP3 as well as other audio compression schemes.
Further, an error correction mechanism
Further, an
error correction mechanism
is employed which is capable of correcting
is employed which is capable of correcting
transmission errors to guarantee superior
transmission errors to guarantee superior
error-free reception even under difficult
error-free reception even under difficult
conditions.
conditions.
To minimize heat and size, the Model 1550
To minimize heat and size, the Model 1550
includes two mono
includes two mono digital class-T amplifiers
digital class-T amplifiers
that provide the power efficiency of traditional
that provide the power efficiency of traditional
class-D digital amplifiers at a far
class-D digital amplifiers at a far lower audio
distortion
distortion. Each wireless amplifier only measures
. Each wireless amplifier only measures
5 x 3.5 x 2 inches and is easily mountable to a
5 x 3.5 x 2 inches and is easily mountable to a
speaker.
speaker.
The
The noise shaping filter which is part of the
noise shaping filter
wireless amplifier from Amphony achieves a
wireless amplifier from Amphony achieves a
higher signal-to-noise ratio compared to
higher signal-to-noise ratio compared to
conventional digital-to-analog converters by
conventional digital-to-analog converters by
eliminating quantization noise from the audible
eliminating quantization noise from the audible
frequency band.
frequency band.
By transmitting the audio in a
By transmitting the audio in a digital format at 5.8 GHz, the Digital
Wireless Audio Transmitter / Amplifier from Amphony allows you
Wireless Audio Transmitter / Amplifier from Amphony allows you
to eliminate the hassle of wires and is fully immune to interference
to eliminate the hassle of wires and is fully immune to interference
from 2.4 GHz wireless devices.
from 2.4 GHz wireless devices.
(3 million bits per second) and since
lower audio
which is part of the
digital format
true CD quality
without audio degradation
at 5.8 GHz, the Digital
no audio
Stampa la pagina