Combi Catalyst Manuale di istruzioni - Pagina 10
Sfoglia online o scarica il pdf Manuale di istruzioni per Passeggino Combi Catalyst. Combi Catalyst 13.
Stampa la pagina
Combi Car Seat Adapters are Compatible with the following infant car seats: Combi
33, Combi
Navette 22, Chicco
®
slightly different for each manufacturer.
To attach car seat adaptor:
Insert the posts on the sides of the
car seat adapter into the slots of
the frame. Push until you hear a
"click" on both sides.
To remove car seat adaptor:
Pull inward on both red levers,
then pull adapter upward.
*Special Instruction for Combi® Shuttle Car Seat:
Insert the rear portion of Shuttle car seat into the car seat adaptor as
shown on the right. Align the orange tabs on each side of the Shuttle
car seat with the red arrow on the car seat adaptor. Push down on
the front portion of the Shuttle car seat. Listen for the audible "click"
to indicate proper insertion of the car seat. Pull upward on car seat to
be sure car seat is secured to stroller. Route the car seat attachment
straps through the car seat vehicle belt path.
Always pull upward on the car seat to ensure that it is secure before routing the car seat attachment straps.
If the seat is not secured to the car seat adaptor, then remove the car seat and re-start.
10 Catalyst Instruction Manual
CAR SEAT ADAPTER INSTRUCTIONS
Key Fit® 30, Graco
®
*To attach an infant car seat:
1. Lock stroller wheels to
2. Hold car seat above the
3. Push car seat downward
4. Route car seat attachment
5. Pull upward on car seat
NOTE: You must ALWAYS use the safety belt to secure the car seat.
SnugRide
35 and Graco
®
®
prevent stroller movement.
mounting points on stroller.
onto the mounting points
on stroller. Listen for the
"click" to indicate the car
seat is secured to the
stroller.
straps through the car
seat's vehicle belt path.
(Refer to Car Seat
Instruction Manual for
additional information)
to be sure car seat is
secured to stroller.
Shuttle, Combi
Shuttle
®
®
SnugRide
30. Instructions are
®
®