Follett 400 Series Manuale di installazione e assistenza - Pagina 9
Sfoglia online o scarica il pdf Manuale di installazione e assistenza per Fabbricatore di ghiaccio Follett 400 Series. Follett 400 Series 20. Icemaker and top kit for remcor/cornelius countertop ice and beverage dispensers
Stampa la pagina10. Use pliers to compress and remove cage nut at front
of condenser on icemaker base (Fig. 6.1).
11. Install filter and grille. Lock in place using four
mounting screws (Fig. 6.2).
12. Make water, drain and electric connections
to icemaker (Fig. 7).
Note: Water connection accepts 3/8" OD
copper or plastic tubing. Push tubing in
until it stops. Use supplied 90˚ push-in
water inlet fitting if there is not enough
clearance behind icemaker to install
water tubing without kinking tubing or
putting stress on fitting.
Note: Follett recommends the installation
of a Follett water filter system
(par# 00130229) on supply water
inlet.
Fig. 6
2
Fig. 7
Power
115V
3/8" OD
water inlet
Drain
3/4" MPT
9
2
1
filter
grille
Back view – air-cooled
top mount
C
B
A