AmpleNess S52200 Manuale d'uso - Pagina 17

Sfoglia online o scarica il pdf Manuale d'uso per Immagazzinamento AmpleNess S52200. AmpleNess S52200 18. Home energy storage system (split type)

Abnormal

temperature

inside system

Low battery

System fault

The split-type battery is designed with indicators on the upper panel, and has perfect

protection function. Battery system will stop to output power and indicators will indicate the

abnormal condition once the abnormality or failure occurs.

9. Maintenance and Recycling

Frequent maintenance is required in order to ensure the continuous and normal operation of

battery, and recycling of old equipment is also required in order to settle the environmental

protection issues.

9.1 Operation environment

The installation and storage of battery should avoid the environment of high

corrosiveness, high dust, high temperature and high humidity, especially avoid metal

substances falling into the box.

9.2 Security examination

Please check regularly whether connecting line is aging, and whether connection point of

cable is tight and safe.

9.3 Maintenance requirement

Please cut off power supply completely before opening the box for maintenance. Please

don't damage parts and components when disassembling, and pay attention to the sequence of

wiring. Please also perform maintenance by wearing insulting gloves and using insulting tools.

9.4 Specific requirements of maintenance

Please clean the dust and debris in box, and check whether the terminals and screws in

box are fastened, whether traces left and damaged components by overheating in the box.

Please refer to user manual to deal with problems when the battery is in fault and cannot work

normally. If the problem still cannot be solved, please contact with the dealer or the

manufacturer as soon as possible. Don't disassemble parts by yourself.

9.5 Battery Recycling

User Manual of Home Energy Storage System (Split Type)

Over temperature

inside box

SOC too low

System operation error

whether load is short circuit

Please turn off the load and restart

it after temperature drops, check

whether ambient temperature

exceeds the standards

Please charge the battery

Please cut off load, shutdown

switch, and restart battery