Combi BC-W31 Manuale di installazione

Sfoglia online o scarica il pdf Manuale di installazione per Accessori per bambini Combi BC-W31. Combi BC-W31 2. Baby keep wa corner mounting kit

Stampa la pagina

Baby Keep WA Corner Mounting Kit Installation Manual

For Corner Installation Use

To Be Used With : Baby Keep Slim WA (Model BK-W62)

In order to safely install the Baby Keep WA, please make sure to read this manual and follow the instructions accordingly.

This guide explains how to attach the Baby Keep Slim WA to a corner. To attach the Baby Keep FL type to a wall, please

refer to the Installation Manual sapplied with the Baby Keep FL type.

Safety Warnings

Safety precautions noted here are divided into "warnings" and "cautions" according to the urgency and seriousness of the harm and

damage that may occur. Please read this instruction manual carefully before use, and observe the safety precautions.

If this label is ignored or mishandled, there is risk of serious injury or death.

WARNINGS

If this label is ignored or mishandled, there is risk of injury or property damage.

CAUTIONS

• Make sure that installation hardware such as anchor bolts can be firmly placed into the wall. (Failure to do so may result in fall.)

• If mounting onto a concrete

Incorrect

wall, the tip of the anchor bolts

must be embedded at least

Anchor

40mm into the wall. Failure to

Bolts

do so may result in fall.

• Apply foundational reinforcement if the wall surface is other than concrete.

*Make sure that each mounting point can withstand a strength of 1,000 N (100 kgf or more)[fix 4 mounting points]. Failure to do so may result in fall.

Types of Screws used for Wall-mounting

Concrete/ALC Installation

Please prepare the following before installation:

• Female screw anchor bolts

*Use ALC-specific anchors for ALC installation

Bolts

Use M6, M8,

Spring washers

or M10 types

Washers

Installation Location (Installation Range)

To assist the child promptly,

• Height of Installation

Location

do not install the unit far

from the caregiver.

WARNING

Install the unit where the caregiver

can see the child.

600mm as standard

Not interfere with door

Install the Baby Keep at

least 300mm from

the toilet

WARNING

Tile

Correct

40 mm or greater

Secure the anchor bolts

Concrete

firmly into concrete,

Anchor

to a depth of at least 40mm.

Tile

Bolts

Mortar

Concrete

4 large

CAUTION

holes

Do not use male screw

anchor bolts.

WARNING

Prevent

Below the seating surface, as described in

from escaping

the diagram on the left, do not place

handrails (including hinged one), trash

can, or other objects. The child may stand

up and escape and may fall.

300mm

• Install on a wall at least 600mm away from the toilet, or insure 300mm of space

between the Baby Keep FL and toilet.

WARNING

CAUTION

If installing the Baby Keep FL in a

The Baby Keep FL should be

private restroom, install the Baby

installed clearly from door space.

Keep FL in a location where the child

Otherwise it may cause damage.

can be seen by the adult using the

restroom at all times.

Routine Safety Inspection

Conduct the daily and annual safety inspections described below in

order to safely use this product. Injury or serious accident could

occur if safety inspections are not performed and/or problems with

WARNING

the product are not observed.

The daily or weekly inspection is a check using both eyes and hands. No tools are necessary.

1. Physical Inspection

1. Check for loose parts

2. Make sure the base does not wobble or shake,

and that the guard is firmly in place

3. Check for scratches or broken parts

2. Checking the Guard's Function

1. Insure that the guard is firmly in place, does not wobble

or shake, and moves from left to right.

2. After testing the opening and closing function of the guard several times,

insure that neither the base nor the guard wobbles or shakes.

3. Sticker Check

Stickers should be firmly adhered and

legible. Check for scratches, rips, missing stickers,

or fadedness.

4. Head and Seat Pad Check

Check for scratches and broken parts. Make sure

the head and seat pads do not wobble or shake.

For more information regarding the maintenance inspection (additional cost) and repair parts (sold separately).

• Main maintenance parts include pads and decals.

• Product durable period is 7 years. Repair Parts available with in 5 years after end of production.

Technical Specifications

BC-W31

Product Number

Corner Mounting Kit

Product Name

Dimensions

W205×D65×H623.5mm

*Be advised that technical specifications for this product may change without notice for reasons such as improvement in design.

Manufacturer

2-6-7, Motoasakusa, Taito-ku, Tokyo 111-0041 Japan

If a problem is found during the inspection, immediately

stop using it, and contact your dealer or the service

center below for assistance.

Usage instructions stickers

(supplied with Baby Keep)

*Guide stickers, 2

(supplied with Baby Keep)

Head pad

Guard

Base logo sticker

Base sticker

Routine inspection sticker

Bottom cover

1.9kg

Weight

• BBase/Steel (Rust-proof)

Materials

• Corner Cover/ABS Resin

See back for mounting instructions.

*For information on products, contact the distribution agency.

Distributor

Head Office/2-6-7, Motoasakusa,

Taito-ku, Tokyo 111-0041 Japan

TEL : 81-3-5828-7631 FAX : 81-3-5828-7630

www.combiwith.co.jp/

Corner sticker

Backboard

137916080 201225

(

)