Dow ENERFOAM Raccomandazioni per l'installazione

Sfoglia online o scarica il pdf Raccomandazioni per l'installazione per Spruzzatore di vernice Dow ENERFOAM. Dow ENERFOAM 4. Professional foam sealant

Stampa la pagina

installation information . commercial/residential

installation recommendations for

enerFoaM ™ Professional Foam Sealant

The instructions outlined here

describe how to use ENERFOAM™

Professional Foam Sealant to fill

gaps and cracks around the home.

Designed to fill gaps up to 3" (75

mm), ENERFOAM™ Professional

Foam Sealant expands to take the

shape of cracks and voids, forming

a permanent, airtight and water-

resistant bond to vinyl, wood and

metal surfaces.* Once cured, it

remains soft and flexible, permitting

natural expansion and contraction

of surrounding surfaces.

To determine the amount of

ENERFOAM™ Professional Foam

Sealant required for an application,

see Table 1.

P r e Pa r a t i o n

1. Read and follow the Safety and

Conditions of Use instructions

below. Wear gloves, safety

glasses or goggles and

long sleeves. Provide good

ventilation and eliminate all

sources of ignition.

2. Shake can vigorously for 1

minute before dispensing and

between uses.

3. Gun-applied version: Invert can

and screw foam dispensing gun

assembly firmly onto valve as

shown in Figure 1. Screw until

table 1: eStiMated YieldS For

enerFoaM ™ ProFeSSional FoaM Sealant

CAN SIzE, Oz (G)

DElIvERy

24 (680)

Reusable straw

24 (680)

Gun

30 (850)

Gun

(1) Estimated yield under ideal conditions, 3/8" (1 cm) bead.

®™Trademark of The Dow Chemical Company ("Dow") or an affiliated company of Dow

*For cavities, cracks and penetrations larger than 3" (75 mm), Dow recommends FROTH-PAK™ Foam Sealant or FROTH-PAK™ FS Foam Insulation. For window and door framework, minimal-expanding GREAT STUFF PRO™

Window & Door Insulating Foam Sealant is proven not to distort or bow the framework, when properly applied.

finger-tight; do not overtighten

(Figure 2). When changing cans

using the foam dispensing gun,

tighten the flow control knob

before removing the empty can

(Figure 3). Use gun cleaner,

acetone or other adhesive

remover to remove any residual

foam from the attachment area

before attaching fresh can.

Straw-applied version:

Attach the nozzle by twisting it

clockwise into the valve.

Figure 1

yIElD

, lINEAR

ESTIMATED CAUlK

(1)

FEET (M)

EqUIvAlENCy, qUART TUbES

775 (236)

970 (296)

1,450 (442)

Figure 2

Figure 3