Dow GREAT STUFF PRO 13 Informazioni sull'installazione

Sfoglia online o scarica il pdf Informazioni sull'installazione per Utensile elettrico Dow GREAT STUFF PRO 13. Dow GREAT STUFF PRO 13 4. Wall & floor adhesive dispensing gun

Stampa la pagina

GREAT STUFF PRO

Wall & Floor

™

Adhesive is a heavy-duty adhesive

specially formulated to bond subfloors,

drywall, paneling, foam panels and most

construction materials. Different from

traditional adhesives because of its

excellent bonding power on dry, damp

and even frozen lumber, GREAT STUFF

PRO

Wall & Floor Adhesive provides

™

a fast-grab tack and long-term high-

strength bond. It bonds to lumber,

plywood, particle board, masonry,

drywall, concrete and foam panels.

It is an ideal choice for anchoring,

joining and stabilizing insulated

concrete forms and structural insu-

lated panels. GREAT STUFF PRO

& Cracks Insulating Foam Sealant can

be used to seal gaps in the forms and

prevent concrete leakage during the

pouring stage.

Materials Checklist

• GREAT STUFF PRO

Wall & Floor

™

Adhesive

• PRO Series foam dispensing guns

(Figure 1)

• Protective wear, including goggles,

gloves and proper clothing

• Dry cloth, putty knife or paint scraper

• GREAT STUFF PRO™ Gun Cleaner,

acetone, or other adhesive remover

I N S T A L L A T I O N I N F O R M A T I O N | United States /Canada | R E S I D E N T I A L

Wall & Floor Adhesive

™

Pro 13

Figure 1.

Safety and Conditions of Use

• Read the label and Material Safety Data

Gaps

Sheet carefully before use.

™

• GREAT STUFF PRO

Adhesive contains isocyanate and a

flammable blowing agent. Vapor may

travel to other rooms. Ensure adequate

ventilation. Shut off all pilot lights and

extinguish open flames; eliminate all

sources of ignition before use. Do not

smoke or use lighters or matches while

dispensing foam.

• Do not breathe vapor or mist. Use in

well-ventilated areas or wear proper

respiratory protection. Isocyanate is

irritating to the eyes, skin and respira-

tory system, and may cause sensitiza-

tion by inhalation or skin contact.

• GREAT STUFF PRO

Adhesive is very sticky and will adhere

to most surfaces and skin. Do not get

foam on skin. Wear gloves, and goggles

or safety glasses. Cured foam must be

mechanically removed or allowed to

wear off in time.

• The contents are under pressure. The

• GREAT STUFF PRO

Pro 14

Pro 15

™

Wall & Floor

Preparation

1. Remove all contaminants (water,

2. If the surface area has been previously

Wall & Floor

™

3. Whenever possible, allow any concrete

can may burst if left in areas suscepti-

ble to high temperatures, such as motor

vehicles, or near radiators, stoves or

other sources of heat. Do not lace can in

hot water. Do not puncture, incinerate

or store at temperatures above

120ºF (149ºC).

Wall & Floor

™

Adhesive should not be used around

heaters, furnaces, fireplaces, recessed

lighting fixtures or other applications

where the foam may come in contact

with heat-conducting surfaces. GREAT

STUFF PRO

foam will burn if exposed

™

to open flame or sparks from high

energy sources, and it will start to

thermally degrade if exposed to

temperatures above 240ºF (116ºC)

for long periods of time.

oil, dust, dirt, debris or other loose

materials or release agents) that may

affect the adhesion between the sub-

strates. If in doubt, conduct an adhe-

sion test, waiting at least one hour to

assess the bond.

painted, scrape away all loose or poorly

adhered paint and sand or thoroughly

roughen the surface. Conduct an

adhesion test if any previously painted

surfaces are to be bonded.

or masonry substrates to completely

cure before bonding.