Dowco Iron Rider 04890 Istruzioni per l'installazione
Sfoglia online o scarica il pdf Istruzioni per l'installazione per Accessori per moto Dowco Iron Rider 04890. Dowco Iron Rider 04890 2. Rumble tail bag
Stampa la paginaWARNING
Please read and understand these instructions completely before installation to avoid possible injury to yourself or damage to
the accessory or vehicle. If you are unsure of your ability, seek the help of a qualified mechanic.
WARNING
Do not exceed the manufactures recommended load capacity.
Consult your owner's manual for tire inflation pressuers and gross axle weight rating. Failure to follow recommended weight
loading capacities may affect handling. This could result in property damage, injury and possibly death.
1. INSTALLATION
▶ The Rumble bag is comprise of a large main bag and a smaller top bag.
▶ This bag is designed for the passenger pillion, or raw fender of sport bikes or cruisers.
▶ The Rumble attaches to the motorcycle with four tie-down straps. Each strap has a loop sewn on the end so the strap
can be looped around a strong anchor point. (Fig 1)
▶ Two portable D-rings are supplied with the bag to help anchor the bag to the motorcycle. (Fig 2)
▶ Top bag is designed as an adjustable top net and can be used to store jackets under it when attached to
the main bag. (Fig 2)
▶ Top bag is expandable and can be attached to the main bag (Fig 2) or to the motorcycle (Fig 3).
▶ Two sheets of clear protective film are provided with each bag. Custom cut the film to protect exposed paint
especially when bag is used on a raw fender.
NOTE: Do not overpack the bag, allow the bottom to keep its curvature to properly fit the pillion or fender.
Fig. 1
142629-00
INSTALLATION INSTRUCTIONS
BAG INSTALLATION: 04890 Rumble Tail Bag
Fig. 2
Top Bag
Expansion
Gusset
Jacket
Portable
D-rings
10/14