Dowco Rally Pack Value Series Istruzioni per l'installazione - Pagina 2
Sfoglia online o scarica il pdf Istruzioni per l'installazione per Accessori per moto Dowco Rally Pack Value Series. Dowco Rally Pack Value Series 3. Value series saddle bag and tail bag
Stampa la pagina3. Mounting Tail Bag Only
▶ Place Tail Bag on tail section of bike with carrying handle facing the rear of bike. (Fig. 2)
▶ Locate both straps w/(1) hook.
▶ Secure straps to passenger foot peg or suitable fixed frame member on left and right side of bike. (Fig.2)
▶ Connect straps to front D-rings on bag.
▶ Locate strap w/(2) hooks.
▶ Install strap w/(2) hooks around tail section of bike and connect to bag. (Fig. 3)
▶ Adjust straps to create a snug fit on bike.
▶ Insure that bag does not interfere with indicator lights, tail pipe or any moving parts of the motorcycle.
If you encounter interference, readjust bag position using adjustable straps.
Fig. 2
4. Mounting Tail Bag to Saddlebags
▶ Install saddlebags on bike per instructions on page one.
▶ Place Tail bag on tail section of bike with handle toward the rear.
▶ Use the 4 short straps with clips on both ends to connect to the 4 D-rings on the bottom of the Tail bag
to the 4 D-rings on the tops of the saddlebags. (Fig 4), (Fig 5)
▶ D-rings on the saddlebags will each hold two clips.
▶ Adjust all straps to securely position bag in desired location.
▶ Insure that all bags do not interfere with indicator lights, exhaust pipes or any moving parts of the motorcycle.
If you encounter interference, readjust bag position using adjustable straps.
142291-00
INSTALLATION INSTRUCTIONS
BAG INSTALLATION: 50104-00, 50105-00
Value Series Saddle Bag and Tail Bag
Fig. 3
11/14