Follett Horizon Elite H E710ABT Series Manuale di istruzioni per l'installazione - Pagina 11
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Fabbricatore di ghiaccio Follett Horizon Elite H E710ABT Series. Follett Horizon Elite H E710ABT Series 16.
Stampa la pagina
5.5
TDS switch
§ Set the TDS switch on the elctrical box.
– HIGH: for extended service life
– LOW: for low-scale water
5.7
Ice transport tube
➋
§ Slide ice machine into docking assembly
ensuring that drain tube is fully seated on
barbed drain fitting
§ Insert ice transport tube into coupling and tighten
➋
nut firmly
.
BIN • TOP-MOUNT
TDS
HIGH
CLEAN
LOW
➊
➊
.
5.6
Cooling Lines
§
Install ice machine cooling water lines to docking
assembly.
5.8
Water solenoid, shut-off valve, and
potable water line options
5.8.1
If water solenoid is already mounted to
evaporator:
1. Insert potable water line into shut-off valve.
5.8.2
If this is an undercounter installation:
1. Mount water solenoid atop evaporator
and locate the shut-off valve inside the
machine. Insert potable water line into
shut-off valve.
5.8.3
If water solenoid is not mounted and
machine will not be installed undercounter:
1. Mount water solenoid to inside rear (upper
right corner) of docking assembly using
one screw.
2. Insert potable water line into shut-off
valve - locate the shut-off valve outside the
machine.
3. Insert outgoing line from shut-off valve into
push-in connection of water solenoid.
Horizon 710/1010/1410
In
Out
11