Caraudio-Systems c.LOGiC C2-E65-TV Manuale - Pagina 12
Sfoglia online o scarica il pdf Manuale per Automobile Accessories Caraudio-Systems c.LOGiC C2-E65-TV. Caraudio-Systems c.LOGiC C2-E65-TV 15. Interface compatible with bmw e65 professional navigation systems with old idrive (e65) and menu button, without factory rear-seat entertainment
Stampa la pagina
2.3.4. Factory nightvision, factory DVD-changer, factory rear-view camera
On vehicles with factory nightvision, factory DVD-changer or factory rear-view camera, pin
out the video-signal and video-signal ground from the white 18pin AMP connector of the
vehicles harness (rear of navigation computer) and connect them by male RCA-connector to
the R-CAM IN of tuner-box.
Navi
Video-signal
E65
Pin 1 (yellow-black)
The factory component will work as before.
3. Operation
3.1.
Activation of the video-in-motion function
Tthe video-in-motion function is permanently active without disturbing the navigation
performance.
3.2.
Selecting the c.LOGiC as current AV-source
In the vehicle's main menu, select Infotainment and then TV by iDrive to choose the c.LOGiC
as current AV-source.
3.3.
Assigning device controls
After selecting the c.LOGiC as current AV source, push
iDrive knob to open the c.LOGiC control menu. Select
control levels setup "DEV1: RCxx" ("DEV2:RCxx") and
assign related IR-code for AV1 (AV2) as described in
device control table.
Note: The IR-control channel DEVV1 is preset to RC-Code 41 compatible DVB-T tuners and
DEV2 is preset to RC-Code 09 for the usbLiNK.
If the AV2 is deactivated (see chapter Deactivating c.LOGiC AV2-input), the menu items "USE
DEV2" and "DEV2: RCxx" will not be available.
Version 20.09.2017
Video-signal ground
Pin 10 (green)
C2-E65-TV