Follett Horizon Elite HCD1410RHT Manuale di istruzioni per l'installazione - Pagina 5
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Fabbricatore di ghiaccio Follett Horizon Elite HCD1410RHT. Follett Horizon Elite HCD1410RHT 17. Top-mount applications
Anche per Follett Horizon Elite HCD1410RHT: Manuale (8 pagine), Manuale di istruzioni per l'installazione (17 pagine), Manuale (8 pagine)
Stampa la pagina
Prepare the installation site.
Provide drainage, water supply and electrical power to within 6 feet (2m) of ice
machine in accordance with local and national codes. Outdoor installation of
low side is not recommended and will void warranty.
2.1
2.1
Installation site requirements
1/4" per foot
(6,4 mm per 0,3 m)
Electrical
➊
• 120/60/1-5 amps
Potable water supply
• 10-70 psi (69-483kpa)
• 45-90 F (7-32 C)
• Follett recommends the use of an in-line water filtration system (item# 00130286)
• This equipment is to be installed with adequate backflow protection to comply with applicable
federal, state, and local codes
➌
Drain
(3/4" MPT)
• The drain line from the ice machine must have at least 1/4" per foot pitch (6,4 mm/0,3 m)
Refrigeration lines
➍
• 5/8" ∅ (15,8 mm) diameter suction line (insulated)
• 3/8" ∅ (9,5 mm) liquid line
HARMONY • TOP-MOUNT
➋
1'
➋
(3/8" push-in internal connection, 3/8" OD tubing required)
➎
remote condensing
➎
3/8" ∅ (9,5 mm)
➍
5/8" ∅ (15,8 mm)
NEMA
➊
➌
➍
Site preparation
5-15
2
5