Caraudio-Systems c.LOGiC C2-MFD2 Manuale - Pagina 4
Sfoglia online o scarica il pdf Manuale per Elettronica per autoveicoli Caraudio-Systems c.LOGiC C2-MFD2. Caraudio-Systems c.LOGiC C2-MFD2 14. For navigation systems volkswagen mfd2/rns2 skoda nexus
Stampa la pagina1.2.
Check compatibility of vehicle and accessories
Requirements
Vehicle
Navigation
Limitations
Factory-TV-tuner
1.3.
Setting the dip switches of the CAN-box TV-400
All vehicles
1.4.
Setting the dip switches of the Interface-box C2C-M200
The default dip switch settings of the Interface-box
need to be changed ONLY if an after-market
rear-view camera shall be connected or if the AV2
of the c.LOGiC shall be deactivated. The dip
switches are located inside the Interface-box.
For changes it is necessary to open the box.
Default settings are:
Dip1 = ON, dip2 = OFF, dip3 = OFF
Note: Instead of dip switches, there might be jumper 1 to 3.
1.4.1. Automatic switching to rear-view camera
If an after-market rear-view camera shall be connected, in order
for the c.LOGiC to automatically switch to its camera input
on engaged reverse gear,
set dip2 = ON (up).
1.4.2. Deactivating c.LOGiC AV2-input
If only one AV-source shall be connected to the c.LOGiC, we
recommend to disable the AV2-input, to avoid customers switching by
mistake to black/no picture of the AV2-input. In order to disable the
AV2-input of the c.LOGiC,
set dip1 = OFF (down).
Version 01.09.2011
Volkswagen and Skoda
MFD2/RNS2 or Nexus navigation
Must NOT be installed.
dip 1 ON, dip 2 OFF, dip 3 OFF
dip switches
Interface-box
C2-MFD2