AMPLIFIED ENGINEERING fatbox G3 Manuale - Pagina 16
Sfoglia online o scarica il pdf Manuale per Porta d'ingresso AMPLIFIED ENGINEERING fatbox G3. AMPLIFIED ENGINEERING fatbox G3 20.
WEB
fatbox G3
MANAGEMENT
MENU OPTIONS
3.7
SERIAL PORT
Quick Start
LAN Ethernet
WAN Cellular
Port Forwarding
F ATBOX G3 has a built in
Dynamic DNS
TCP server to allow a remote
IPSEC VPN
device (e.g. a meter read-
Serial Port
ing server) to connect over
Management
cellular network to device(s)*
System Status
attached to the serial port of
Logout
the FATBOX.
When the 'Serial to TCP
Transport' is enabled, it
allows for communication
between the remote TCP
client and the G3's serial port
(via port 70).
*
Note that only in the RS-485
mode can you connect multiple
devices to the FATBOX.
Serial Port Management
Port Mode Selection
1
Serial to TCP Transport (Server Port:70)
Enable
1
Speed
115200
Data Bits
8
Parity
10800
Stop Bits
1
AT over Ethernet (115200, 8D, NS, 1S, Port:77)
Port Mode Selection
1
UPDATE
0 = RS232, 1 = RS485
1 = enable 0 = disable
E.g. 9600
E.g. 8
E.g. NONE, EVEN or ODD
E.g. 1
1 = enable 0 = disable
fatbox G3
1 = TCP Server Enable,
0 = TCP Server Disable
Setting to match attached serial device
FATBOX G3 also allows messages (e.g.
modem AT commands) to be send and
received from the cellular modem via the
LAN port (e.g. port 70). For example, an
Ethernet attached Data Concentrator can
send AT commands to the FATBOX (e.g.
192.168.1.1:77) to query signal strength
(AT+CSQ) or to send custom SMS.
1 = Enable,
0 = Disable
Update and reboot FATBOX.