DOYMA Curaflex Nova Uno/M/Z Istruzioni per l'installazione
Sfoglia online o scarica il pdf Istruzioni per l'installazione per Apparecchiature industriali DOYMA Curaflex Nova Uno/M/Z. DOYMA Curaflex Nova Uno/M/Z 4. Gasket inserts
Stampa la paginaEnglish
INSTALLATION INSTRUCTIONS
Curaflex Nova
Gasket inserts
Curaflex Nova
Uno/M/Z
®
Intended use
The gasket insert Curaflex Nova
the sealing of several pipes and cables with a smooth surface.
Curaflex Nova
Uno/M/Z is hinged, to accommodate sealing pipes
®
and cables that have already been laid.
Please note:
• Gasket inserts are not secure points or support bearings; they are
only used for elastic sealing of pipes/cables.
• Slight axial movements of the pipes and cables are permitted.
Furthermore, fixing tabs are optionally available and can be
screwed onto the frame ring (fixing set accessory). These tabs
additionally secure the gasket insert when the pressure loads are
higher.
• Curaflex
gasket inserts are maintenance-free. Once correctly
®
installed, it is not necessary to re-tighten the bolts.
• The relevant FHRK standard (minimum seal width) can be found
on the product label.
• The applicable national regulations governing the laying and
filling of pipes and cables must be observed.
®
Uno/M/Z is especially suitable for
®
Curaflex Nova
Uno/M/Z
®