Advanced Ansi 9206C-LE Manuale di istruzioni per l'utente - Pagina 9

Sfoglia online o scarica il pdf Manuale di istruzioni per l'utente per Attrezzatura di sicurezza Advanced Ansi 9206C-LE. Advanced Ansi 9206C-LE 11. Shock absorbing lanyard

8.4 Y Lanyard (6ft. & 12ft.) free fall carry a dynamic hip test failure warning label on both connecting ends instructing users
to safely store the unused leg of lanyard.
Warning: User must ensure that unused Leg of the Y lanyard is safely stored and it does not cause obstruction.
9.0 MATERIAL OF CONSTRUCTION OF ENERGY ABSORBING LANYARD :
9.1 Lanyard is made of high tenacity Polyester yarn/Nylon/Steel/Aramid.
9.2 Energy absorber attached to the lanyard is made of Polyamide webbing with Polyester/Aramid back up strap.
HOW TO DISPOSE A LANYARD:
When the lanyard becomes unts or in case of any wear and tear, dispose the lanyard immediately.
FOLLOW THE STEPS FOR DISPOSAL:
Make the three plastic crates namely- Textile, Metal & Plastic for placing the respective components of the lanyard.
n
Spread the lanyard on a table / at surface.
n
Inspect the wear & tear present on the lanyard.
n
If any wear and tear is observed, dispose the lanyard using a sharp scissor; rst cut the Textile and dismantle the
n
lanyard.
Put the Textile, Plastic & Metal components in their respective plastic crates.
n
DISCLAIMER:
This information on the product is based upon technical data that Advance Safety obtained under laboratory conditions
and believes to be reliable. Advance Safety does not guarantee results and take no liability or obligation in connection
with this information. As conditions of end use are beyond our control it is the user's responsibility to determine the
hazard levels and the use of proper personal protective equipment. Persons having technical expertise should undertake
evaluatio n under their own specic end-use conditions, at their own discretion and risk. Please ensure that this information
is only used to check that the product selected is suitable for the intended use. Any product that is damaged, torn worn
or punctured should be discontinued from usage immediately.
8