AmpliVox SW225 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Sistema di altoparlanti AmpliVox SW225. AmpliVox SW225 6. Voice projector powered speaker with internal 16 channel uhf wireless receiver and amplifier

Stampa la pagina

CONTROL PANEL FEATURES

15. Wireless Channel Selector

(see Below)

14. Wireless ON/OFF Switch

13. DC In Jack — plug in optional Universal AC

Adapter/ Recharger for power.

12. Aux Out - for optional 12-15 volt accessory.

11. Condenser Mic Jack - 3.5mm

for lapel or headset mic

10. Wireless Mic Jack -3.5mm

for optional wireless receiver

9. Auxiliary Line In— 3.5mm add

music with a tape player, CD or MP3

player

8. Line Out—3.5mm

record your presentation with a tape record-

er or a computer sound card

Wireless Channel Selector

1. Power Switch.

2. Power Indicator Light. Turns red when

power is turned on.

3. Mic Volume Control. This knob controls

output loudness to all 3 mic inputs and Siren.

4. Dynamic Mic Jack. Dynamic is one kind of

mic. AmpliVox's wired, hand-held mic is this

type.

5. Auxiliary Volume Control. This volume

knob controls the auxiliary volume separately

from the mic volume.

6. Tone Control. This knob controls the tone of

the auxiliary input. Turn counter-clockwise for

more bass or clockwise for more treble. (The

mic jacks don't need a tone control because

they have been pre-optimized for the human

voice.

15. Wireless 16 Channel Selector

rotate knob to select wireless channel on the

built-in receiver. RF LED will light up when

receiving signal from transmitter.

Channel selected must match

7. Left & Right Speaker Jacks. Plug

speaker leads from speakers into the

two jacks.

8. Line Out Jack. Can be used with a

tape recorder The Line Out Jack out-

puts all the sound from the 3 mic inputs

and the auxiliary input.

9. Auxiliary Line In Jack. To play mu-

sic, just plug in your CD player, MP3

player or Amplivox Bluetooth Receiver.

10. Wireless Mic Jack. Optional se-

cond wireless receiver goes here. Then

plug AmpliVox's lapel or headset mic

into the transmitter; that's the one with

the belt clip. Now you are hands-free

anywhere within a 300- foot radius of

the receiver.

11. Condenser Mic Jack—with phan-

tom power. If you don't know what

phantom power is, then you don't need

to know, but a condenser mic won't

work without it. If you have AmpliVox's

lapel or headset mic, plug it in here.

1. Power Switch

2. Power Indicator Light

3. Mic Volume-controls all 3 mic inputs

4. Dynamic Mic Jack— 1/4 " for wired, hand-held mic.

5. Auxiliary Volume—

controls the auxiliary input separately from the mic volume

6. Tone Control—

for auxiliary input; counterclockwise for more bass; clockwise

for more treble

7. Left & Right

Speaker Jacks— 1/4 "

—

16. Wireless 16 Channel

UHF Bodypack Microphone

Transmitter

12. Aux Out. For optional 12-15 volt

accessory.

13. DC In Jack. Used for the 12V

Battery Cable, 12V Power Plug or

the optional International AC Adapt-

er/Recharger, plug it in here. Plug

the other end into a wall / floor outlet.

14. Wireless ON/OFF Switch

Switches power on to the built-in 16

channel wireless receiver.

15. Wireless 16 Channel Selector

Channel that you select here must

match with the channel that is select-

ed on the bodypack microphone

transmitter.

16. Wireless 16 Channel UHF

Bodypack Microphone Transmit-

ter. Connect Lapel or Headset mi-

crophone here.