Follett REFNAT5-GD Manuale di installazione - Pagina 9

Sfoglia online o scarica il pdf Manuale di installazione per Frigorifero Follett REFNAT5-GD. Follett REFNAT5-GD 17.

Operating Instructions

The table below shows the basic operation method. Perform key operation in the sequence indicated in the table.

The example in the table assumes that the refrigerator temperature is 6.0 C.

Note: The unit is set at the factory at 5.0 C.

Basic Operation Procedure (Example of setting the refrigerator to 4.0 C)

Operation

Connect to the power source.

Press SET key.

Set to 4 by using the down

arrow key.

Press and release SET key.

Note: If no key has been pressed for 90 seconds in the temperature set mode, the display mode returns

automatically to the temperature display mode. In this case, the chamber temperature setting is not

changed. The refrigerator temperature can be set in the range between 2.0 C and 8.0 C. The guaranteed

temperature with no load at an ambient temperature of 22 C is 2 C to 8 C.

Key operated

-----

The current refrigerator temperature is

displayed after 5 seconds of connecting the

unit to the power source. When refrigerator

temperature is higher than 25 C, HI is

displayed and LO is displayed when lower

than –10 C.

SET

The digits of the temperature display flash.

Pressing and releasing the down arrow key

▼

shifts down the set point by 0.1 C increments.

SET

The value (4.0) is stored in memory and the

current refrigerator temperature is displayed.

Display after the key operation

REFNAT5-SD, REFNAT5-GD