Follett 110CT425W Manuale di installazione - Pagina 8

Sfoglia online o scarica il pdf Manuale di installazione per Dispenser Follett 110CT425W. Follett 110CT425W 17. Ice and water dispenser

Installing top mount ice machines

Models 110CT425A/W

Dispensers with top mount ice machines cannot be mounted on legs. They must be bolted to counter. Use gloves

when lifting ice machine to protect hands from sheet metal edges.

1. Remove dispenser top front cover by removing two screws at bottom corners of cover, lifting cover slightly

and pulling forward.

2. Remove ice machine compartment top and side panels.

3. Remove ice machine hold-down bracket from front of ice machine compartment.

4. Lift ice machine onto dispenser top and slide ice machine completely into position, compressor end first.

5. Reinstall hold-down bracket on front of ice machine with power cord and bin signal cords in notch. Do not

cut or pinch cords.

6. Insert loose end of ice transport tube through bracket (on ice machine base) into hopper access hole.

Tighten transport tube clamp screw to secure ice transport tube.

7. Connect plastic water supply line to water fill solenoid.

110CT425A/W, 110FB425A/W

CAUTION!

1.00" (2.54 cm)

Tighten clamp

screw