DPA DPA 4006-TL Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Microfono DPA DPA 4006-TL. DPA DPA 4006-TL 13. Omnidirectional microphones

3529-A AND 3530-A KITS INCLUDE

2 x 4006

Omnidirectional Microphone, P48, matched (3530-A)

2 x 4003

Omnidirectional Microphone, 130 V, matched (3529-A)

UA0836

Stereo Boom with Holders

2 x DD0251

Free-field Grid, Silver

2 x DD0297

Diffuse-field Grid, Black

2 x UA0777

Nose Cone

2 x UA0638

Windscreen for 4003/4006/4006-TL

2 x L30B

Acoustic Pressure Equaliser, 30 mm (1.18 in) Ball

2 x L40B

Acoustic Pressure Equaliser, 40 mm (1.57 in) Ball

2 x L50B

Acoustic Pressure Equaliser, 50 mm (1.97 in) Ball

2 x DAO0130

Microphone Cable for 4003/04/12/16, 5 m (16.4 ft)

HMA5000

Hi-Voltage Microphone Amplifier, 2 channel (3529-A)

CARE OF MICROPHONE

It is important to bear in mind the following points with regard to

mounting, microphone care and the use of accessories:

The microphone cartridge is tightly secured to the main body housing,

and no attempt should be made to remove it. If a replacement car-

tridge is required, contact your local DPA Microphones representative.

Types 4003, 4006 and 4006-TL are supplied with an additional

Diffuse-field Grid DD0297 (see "Technical Description" and "Full

Specifications"). On delivery, the normal protection grid is screwed on

to the cartridge housing and normal finger torque is required to

remove it. Do not try to unscrew or tighten the protection grids with

any kind of tool as both surface and thread might be damaged.

Use of windscreen is recommended when microphones are used in

dirty or dusty environments.

When not in use, the microphone should be disconnected and kept in

the case supplied.